20 mm x 52 mm x 15 mm Fersa 6304-2RS deep groove ball bearings

B:58.00 mm; Basic Static Radial Load Rating Co:110000 N; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:138000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:6300 rpm; d:45.000 mm; D:120.0000 mm; Grease Speed Rating n1:3800 rpm;

Calculation factor Y1:1.6; Basic static load rating C0:355 kN; Limiting speed:5000 r/min; Calculation factor Y2:2.3; Db min.:124 mm; D:130 mm; Basic dynamic load rating C:293 kN; Reference speed:3400 r/min; r5 min.:0.6 mm; Calculation factor e:0.43;

Max. speed for Taconite seal:775 r/min; Stabilizing ring:2 x SR-1622; R1:79.375 mm; N1:25.4 mm; Taconite seal:TER 108; H:287.337 mm; End plug (suffix Y):EPR 13; Appropriate attachment bolt size G:0.875 in; P180°:84.5 kN; Adapter sleeve assembly:SNW 22x3.7/8;

d:65 mm; r, r1,2 min.:1 mm; Mass inner ring:0.16 kg; F:73 mm; B:25 mm;

Static (Cor):8.3 mm; Dynamic (Cr):4.5 mm; Pu:349 kN; D:170 mm; Oil:46.600 kN; with tapered bore:2 800 min-1; with cylindrical bore:2 200 min-1; rs (min):2.1 mm; d:80 mm; B:58 mm;

P120°:52.5 kN; Stabilizing ring:SR-20-17; H2:44.45 mm; Cap bolt, SAE grade:8; Cap bolt:5/8-11 UNC; Mass pillow block:21.8 kg; Labyrinth ring:2 x LOR 103; P150°:48 kN; da:88.9 mm; Housing:SSAFS 520;

Basic Dynamic Radial Load Rating C:13300 N; Oil Speed Rating Open/Shielded n2:15000 rpm; Sealed Speed Rating n3:8000 rpm; D:55.0000 mm; Fillet Radius ra:1.00 mm; B:13.00 mm; Grease Speed Rating Open/Shielded n1:12000 rpm; Basic Static Radial Load Rating Co:8300 N; d:30.000 mm; Accessories:Snap-Ring;

Fillet Radius ra:0.30 mm; B:5.00 mm; Accessories:One Seal; D:21.0000 mm; Basic Static Radial Load Rating Co:1040 N; Oil Speed Rating Open/Shielded n2:38000 rpm; Basic Dynamic Radial Load Rating C:1900 N; Sealed Speed Rating n3:19000 rpm; Grease Speed Rating Open/Shielded n1:32000 rpm; d:12.000 mm;

Appropriate attachment bolt size G:0.75 in; R1:73.025 mm; da:79.375 mm; RG:3/8 NPT; A1:111.125 mm; J1:57.15 mm; P120°:48.9 kN; Housing:SAF 618; Max. speed for PosiTrac Plus seal:1800 r/min; ba:42.069 mm;

B:49 mm; dk:92 mm; C1 max.:43 mm; l3 min.:80 mm; Specific dynamic load factor K:100 N/mm²; Mass rod end:10.5 kg; Material constant KM:330; w:80 mm; l7 min.:78 mm; r1 min.:1 mm;

Limiting speed:8500 r/min; C:4.06 mm; da min.:58 mm; Da max.:107 mm; Calculation factor f0:12.1; Reference speed:13000 r/min; D:120 mm; r1,2 min.:2 mm; D3:115 mm; Basic static load rating C0:45 kN;

Material constant KM:330; Lubricant:Regular relubricatio; M:4 mm; D:90.488 mm; r2 min.:1 mm; Specific static load factor K0:300 N/mm²; r1 min.:1.5 mm; α:8 °; B:52.578 mm; Specific dynamic load factor K:100 N/mm²;

Calculation factor Y2:2.1; Basic dynamic load rating C:5100 kN; D1 ≈:496 mm; D:546.1 mm; Fatigue load limit Pu:815 kN; d:406.4 mm; Design variant/feature:TQON/GW; Basic static load rating C0:10200 kN; r1,2 min.:1.5 mm; Calculation factor e:0.48;

Cb min.:13 mm; db min.:78 mm; Da min.:111 mm; r3,4 min.:2.5 mm; d:65 mm; Calculation factor e:0.83; Limiting speed:4800 r/min; ra max.:3 mm; Basic dynamic load rating C:203 kN; a:42.39 mm;

d:70 mm; Reference grease quantity Gref:4.5 cm³; Basic static load rating C0:32.5 kN; Calculation factor f2C:1.12; Preload class A GA:200 N; C3:2.8 mm; ra max.:1 mm; rb max.:0.3 mm; Attainable speed for grease lubrication:14000 r/min; Preload class C GC:800 N;